Домой > Новости > Новости > Common faults and solutions fo.....
Связаться с нами
Команда QC состоит из опытных инженеров и техников. Работая над контролем системы управления качеством CEFCC, система QC охватывает все ...
Связаться с предприятием
Последние новости

Как бороться с отключением питания ЖК-рекламных цифровых вывесок?

Рекламные ЖК-дисплеи - это новая коммуникационная платформа для рекламы, и област...

Очень важно найти основную группу покупателей ЖК-дисплеев

Marvel, как производитель рекламной вывески на ЖК-дисплеях, объединяющей производст...

Marvel's wonderful review of the ISE2020 in the Netherlands

The 2020 Netherlands International Professional Audiovisual and System Integration Exhibition (ISE 2020) was held on February 11 - 14 at the Amsterdam...

Marvel's wonderful review of the ISE2019 in the Netherlands

The 2019 Netherlands InternationalProfessional Audiovisual and System Integration Exhibition (ISE 2019) was heldon February 5-8 at the Amsterdam Inter...

Топ 5 трендов дисплея - цифровой ЖК-дисплей

Топ-5 тенденций в области дисплеев - цифровой ЖК-дисплей В этом году выставка потребительской электроники прошла в Лас-Вегасе не так давно. С экспонентами из каждого ...

Несколько идей о покупке ЖК-дисплея, о котором вы, возможно, не знали

Мало идей по покупке ЖК-дисплея, о которых вы, возможно, не знали

Few Things that will Help you to make reading on LCD more Easy for Eyes

Few Things that will Help you to make reading on LCD more Easy for Eyes Are you using an LCD screen? If yes then this article is foryou. There are man...

Marvel делает большой прогресс в ISE 2018

15-е издание ISE, проведенное великолепно в RAI Amsterdam 6-9 февраля 2017 года, станет самым б...
Сертификаты
ДИСПЛЕЙ ПРОДУКТА

Новости

Common faults and solutions for stand advertising player!

1. The screen of the vertical advertising machine flickers: In daily applications, the flickering display of the vertical advertising machine screen is a problem that users often encounter. In this regard, the user must first perform exclusion checks on external factors such as the magnetic field around the device, power supply voltage and other external factors. If it still cannot be used normally, it is necessary to perform a comprehensive check on the display's graphics driver to eliminate program installation problems. After the above operation is invalid, the user can also try to increase the refresh rate by 75HZ to see if it is feasible. If none of the above operations can achieve satisfactory results, professional assistance is needed, and the user needs to send the equipment to the repair station for inspection.

2. The vertical advertising machine does not respond after plugging in the power supply: The vertical advertising machine does not respond after plugging in the power supply is a problem that often occurs in practical applications. In this regard, the user can try to remove the advertising player, open the back cover of the advertising player, and check whether the dedicated power supply is energized, and whether the existing material is off or loose. The specific method: whether the indicator light is on when using the multi-meter, if it is normal, it means that the power supply is powered. The power supply problem is ruled out, and the user should check the power supply of the decoder board, advertising player drive board, high voltage bar, speaker, and LCD screen in turn.

3. There is no display on the screen, and the indicator on the front panel is flashing: After this problem occurs, the user should check whether the signal line connection between the display and the computer is firm, and check whether the signal line connector is broken or bent or damaged.

4. The screen is black and displays "Signal out of sync range" or "OUT OF RANG": This phenomenon is a thorny problem that users often see in practical applications. Generally, the signal sent by the computer exceeds the display range of the monitor, and the monitor detects It is caused by abnormal signal stop working. In this regard, the user can try to restart the monitor and reset the output frequency of the computer.

5. Thumb-sized black spots appear on the LCD screen: This phenomenon is mostly caused by external force squeezing. Under the pressure of external force, the polarizer in the liquid crystal panel will deform. This polarizer is like aluminum foil. It will not bounce up after being recessed. This causes the difference in reflection of the liquid crystal panel, and the dark part will appear. Part of it is easy to find under the white screen, and the general size is more than ten square millimeters, which is the size of a thumb. Although this phenomenon will not affect the service life of the LCD screen, users should pay more attention not to press the LCD screen with their fingers.